Handsome leather disguise the hardworking safety features of the Inherit Pull On ST. Steel toe caps and static dissipative technology provide trusted on-the-job safety and protection. Static dissipative technology allows small charges of static electricity to be dissipated into the walking surface, thus reducing the accumulation of static electricity. SRX extreme slip resistance properties built into the outsole provides best-in-class slip resistance that exceeds industry standards and reduces the risk of slips and falls in the workplace. From the office to the jobsite, you can rely on this durable dress option with lots of safety properties. Height: 6. 5" | Weight: 28. 80 oz. per shoe | Upper: Full grain leather | Outsole: T963 rubber | Insole: Dual density EVA Steel toe caps meet ASTM F2413-11 safety standards | Meets or exceeds ASTM class 75 Impact and Compression standards, the highest available strength for impact and compression | Under Class 75 test for impact the boot must withstand a 75 lb. impact with 0. 50" clearance | Under Class 75 test for compression the boot must withstand 2,500 lbs. of compression while maintaining at least 0. 50" clearance | Meets or exceeds ASTM F2413-11 standards for static dissipative footwear | Minimizes the buildup of static electricity while maintaining high enough resistance to help protect against live electrical circuits | Do not use static dissipative footwear where conductive or electrical hazard features are required | SRX compound in the outsole provides best-in-class slip resistance and reduces the risk of slips and falls in the workplace | Dual density insole features a heel pad that efficiently absorbs shock for added comfort | Breathable nylon mesh lining | T963 rubber outsole provides superior slip-, oil- water-, heat- and abrasion- resistance | Goodyear Welt construction for durability and can be resoled | Secure leather pull tab at the back makes pulling the boots on easy