CR Mode
Item #: B11-BLK
Constructed with 100% cotton ring-spun washed duck, Carhartt Washed Duck Work Dungaree Pants are designed to take on the toughest jobsites. These pants sit slightly above the waist and are designed with straight leg openings and a full seat and thigh for maximum comfort. A wide variety of tool and utility pockets throughout the pants, along with heavy hauling reinforced back pockets, make it easy to store and organize all of your important work items. The left leg has a convenient loop to keep a hammer within reach. Complete with ultra-strong sewn-on-seam belt loops to support the weight of your work belt, these pants keep you comfortable until the job is done.
Small | Medium | Large | Extra Large | 2X Large | 3X Large | 4X Large | |
Waist Measurement All Pants & Shorts | 28 - 30 | 31 - 34 | 35 - 38 | 39 - 42 | 43 - 46 | 47 - 50 | 51 - 54 |
If your normal inseam preference is: | You should order this size: |
Inseam Measurement | Overall inseam Measurement |
27 - 28 | 28 |
29 -30 | 30 |
31- 32 | 32 |
33 - 34 | 34 |
35 - 36 | 36 |
Straight Traditional Fit | Slim seat and thigh |
Relaxed Fit | Relaxed seat and thigh |
Loose Original Fit | Full seat and thigh |
For best results, measure over your undergarments.
CHEST:
Measure just under arms and across shoulder blades holding the tape firm and level. If your chest falls between sizes, order the next size up.
WAIST:
Measure around your waistline, keeping the tape comfortably loose.
INSEAM:
Measure pants that fit you well. Lay them flat, with the front and back creased smooth. Measure along the inseam from crotch to bottom of leg hem. Or, if you don't have pants that fit comfortably, measure from your crotch to your desired pant length
DIFFERENCES IN TALL AND SHORT SIZING:
OUTERWEAR, LONG-SLEEVE SHIRTS AND SWEATS IN TALL SIZES:
2" longer in the torso than Regular sizes.
2" longer in the sleeve than Regular sizes.
SHORT-SLEEVE SHIRTS IN TALL SIZES:
2" longer in the torso than Regular sizes.
½" longer in the sleeve than Regular sizes.
Item #: B11-BLK
Constructed with 100% cotton ring-spun washed duck, Carhartt Washed Duck Work Dungaree Pants are designed to take on the toughest jobsites. These pants sit slightly above the waist and are designed with straight leg openings and a full seat and thigh for maximum comfort. A wide variety of tool and utility pockets throughout the pants, along with heavy hauling reinforced back pockets, make it easy to store and organize all of your important work items. The left leg has a convenient loop to keep a hammer within reach. Complete with ultra-strong sewn-on-seam belt loops to support the weight of your work belt, these pants keep you comfortable until the job is done.
Small | Medium | Large | Extra Large | 2X Large | 3X Large | 4X Large | |
Waist Measurement All Pants & Shorts | 28 - 30 | 31 - 34 | 35 - 38 | 39 - 42 | 43 - 46 | 47 - 50 | 51 - 54 |
If your normal inseam preference is: | You should order this size: |
Inseam Measurement | Overall inseam Measurement |
27 - 28 | 28 |
29 -30 | 30 |
31- 32 | 32 |
33 - 34 | 34 |
35 - 36 | 36 |
Straight Traditional Fit | Slim seat and thigh |
Relaxed Fit | Relaxed seat and thigh |
Loose Original Fit | Full seat and thigh |
For best results, measure over your undergarments.
CHEST:
Measure just under arms and across shoulder blades holding the tape firm and level. If your chest falls between sizes, order the next size up.
WAIST:
Measure around your waistline, keeping the tape comfortably loose.
INSEAM:
Measure pants that fit you well. Lay them flat, with the front and back creased smooth. Measure along the inseam from crotch to bottom of leg hem. Or, if you don't have pants that fit comfortably, measure from your crotch to your desired pant length
DIFFERENCES IN TALL AND SHORT SIZING:
OUTERWEAR, LONG-SLEEVE SHIRTS AND SWEATS IN TALL SIZES:
2" longer in the torso than Regular sizes.
2" longer in the sleeve than Regular sizes.
SHORT-SLEEVE SHIRTS IN TALL SIZES:
2" longer in the torso than Regular sizes.
½" longer in the sleeve than Regular sizes.
Verified Buyer
Have a question about this product? Our team of product experts is here to help. Have a question about an order instead? Contact us here.
Ask A QuestionIt appears your browser does not have cookies enabled. In order to check out, enable browser cookies and refresh the page.
If you are still having problems, please contact our Customer Relations Department at 636-680-8061.
Helpful
Response from WorkBoots.com