An update to the proven Longwall mining boot, the Longwall II GTX 200G Met Guard CT PR features a 2.0mm waterproof full-grain leather that is triple stitched for maximum durability and wrapped in 3M™ reflective piping for increased visibility, a Vibram abrasion and chemical resistant toe and heel wrap, waterproof and breathable GORE-TEX lining and an oil and slip resistant Vibram Maltese outsole. With the addition of lightweight composite toe caps and flexible internal metatarsal guards, puncture resistant midsoles and dual density insoles with TPU arch supports and PU toe to heel cushioning, the Longwall II meets or exceeds ASTM standards to help you crush anything that stands in your way.

Features of Men's LaCrosse Longwall II GTX 200G Met Guard CT PR Boots

• Composite toe meets ASTM F2413 M I/75/C/75 standards
• Meets or exceeds ASTM class 75 Impact and Compression standards, the highest available strength for impact and compression
• Under Class 75 test for impact the boot must withstand a 75 lb. impact with 0.50" clearance
• Under Class 75 test for compression the boot must withstand 2,500 lbs. of compression while maintaining at least 0.50" clearance
• Composite toe caps will not conduct heat, cold or electricity
• Puncture resistance meets ASTM F2413 testing standards
• Puncture Resisting through the sole and heel area at a force load of less than 1212N (272 lbf) according to ASTM Standard Test Method for Foot Protection
• Flex-Shield II flexible, non-metallic, puncture resistant midsole
• Protection against sharp object penetration is provided by puncture resistant material embedded in the midsole of the boot
• Flexible internal MetFlex metatarsal guard
• Class ASTM F2413-11 Mt/75 footwear retains a 1" clearance after a nominal impact of 75 foot pound (101.7J), i.e., a 50lb weight dropped reaching a 117.9 ± 2.4" per second velocity at impact 3.5" in from the toe of the boots
• Met guards are traditionally used in areas where there is a higher risk of objects falling or rolling on the instep of workers feet
• Electrical hazard protection meets ASTM F2892-11 EH standards
• Shock-resisting soles and heels are capable of withstanding an application of 18,000 volts at 60 Hz for one minute with no current flow or leakage current in excess of 3.0 milliamperes under dry conditions
• Meets CSA Z195-09, Grade 1, Electric-Shock Resistant standards
• 2 mm waterproof leather uppers
• 3M Scotchlite reflective piping for increased visibility in low light conditions
• Vibram dual-density abrasion and chemical resistant rubber heel and toe wraps
• 3M Thinsulate Insulation is an ultra-thin, versatile synthetic insulation that is lightweight, compression-resistant and provides warmth without bulk
• 200 grams of 3M Thinsulate Insulation is best recommend for cool conditions or high activity levels
• Comfort collar padding to reduce chafing
• GORE-TEX membrane uses microscopic pores that are smaller than water droplets, but larger than water vapor molecules, to wick perspiration away from your feet while guarding them from outside moisture
• Triple stitched throughout for maximum durability
• Removable dual density footbed with TPU arch support and PU toe to heel cushioning and protection
• Vibram Maltese outsole provides lightweight comfort as well as superb shock absorption, the compound guarantees great traction and stability on both wet and dry surfaces
• Oil and slip resistant