Men's Thorogood I-Met 2 Wellington Composite Toe Waterproof PR Boots
Item #: 804-4618
Serious jobs call for serious protection. The I-Met 2 Wellington CT WP PR offers whole foot protection with lightweight composite toe caps, puncture-resistance, I-Met² metatarsal guards and electrical hazard protection. Thorogood's I-Met² technology is a breakthrough in metatarsal protection. They feature the only internal, invisible metatarsal guards that are fully integrated with ASTM-approved composite toes. This combination provides unmatched safety protection against impacts, falling objects and all those other worksite hazards that come your way. The uppers are built from waterproof tumbled leather that brings out the natural soft flexibility to hug each foot in a customized fit.
Features of Men's Thorogood I-Met 2 Wellington Composite Toe Waterproof PR Boots
- Height: 10"
- Upper: Waterproof leather
- Outsole: Rubber
- Insole: Removable polyurethane
- Composite toe meets or exceeds ASTM F2413-11 M I/75/C/75 safety standards
- Composite safety toe caps provide the same protection as steel, but are non-metallic, corrosion resistant and transmit less cold
- Meets or exceeds ASTM class 75 Impact and Compression standards
- Under Class 75 test for impact the boot must withstand a 75 lb. impact with 0.50" clearance
- Under Class 75 test for compression the boot must withstand 2,500 lbs. of compression while maintaining at least 0.50" clearance
- Puncture resistance meets ASTM F2413-11 testing standards
- Puncture Resisting through the sole and heel area at a force load of less than 1212N (272 lbf) according to ASTM Standard Test Method for Foot Protection
- Protection against sharp object penetration is provided by puncture resistant material embedded in the midsole of the boot
- Class ASTM F2413-11 Mt/75 footwear retains a 1" clearance after a nominal impact of 75 foot pound (101.7J), i.e., a 50lb weight dropped reaching a 117.9 ± 2.4" per second velocity at impact 3.5" in from the toe of the boots
- The polymer compound used in the I-MET2 metatarsal guard absorbs and deflects impact to the instep of the foot, I-MET2 is an internal, invisible, metatarsal guard that’s completely integrated with the protective toe cap
- Met guards are traditionally used in areas where there is a higher risk of objects falling or rolling on the instep of workers feet
- Electrical hazard protection meets ASTM F2413-05 EH standards
- Shock-resisting soles and heels are capable of withstanding an application of 18,000 volts at 60 Hz for one minute with no current flow or leakage current in excess of 3.0 milliamperes under dry conditions
- Meets or exceeds the ASTM F2913-11 SATRA Test Method TM144 Standard for slip resistance
- Footwear with a static coefficient of friction of greater than 0.5 when tested according to ASTM F 489 using the James Static Coefficient of Friction machine
- Comfortable nylon lining
- X-Stream waterproof construction
- Removable polyurethane insole provides enhanced cushioning
- Engineered composite shank provides torsional support to the arch
- Rubber chevron outsole provides the best in abrasion-, oil-, heat-, chip- and slip-resistance
- Goodyear storm welt construction for superior durability
Men's | Women's |
3 | 5 |
3.5 | 5.5 |
4 | 6 |
4.5 | 6.5 |
5 | 7 |
5.5 | 7.5 |
6 | 8 |
6.5 | 8.5 |
7 | 9 |
7.5 | 9.5 |
8 | 10 |
8.5 | 10.5 |
9 | 11 |
9.5 | 11.5 |
10 | 12 |
10.5 | |
11.5 | |
12 | |
13 | |
14 | |
15 |
Our Width | Thorogood's Width |
Medium | D |
Wide | 2E |
Extra Wide | 4E |
Strategic Accounts
Our staff is dedicated to giving the best quotes for every specific departmental need. Product questions? Budgetary constraints? We can help. With over a decade of experience, our team is more than qualified to deliver excellent service.
Account managers can offer:
Competitive quotes
No sales tax
Free shipping
Single point of contact
-
Description
Men's Thorogood I-Met 2 Wellington Composite Toe Waterproof PR Boots
Item #: 804-4618
Serious jobs call for serious protection. The I-Met 2 Wellington CT WP PR offers whole foot protection with lightweight composite toe caps, puncture-resistance, I-Met² metatarsal guards and electrical hazard protection. Thorogood's I-Met² technology is a breakthrough in metatarsal protection. They feature the only internal, invisible metatarsal guards that are fully integrated with ASTM-approved composite toes. This combination provides unmatched safety protection against impacts, falling objects and all those other worksite hazards that come your way. The uppers are built from waterproof tumbled leather that brings out the natural soft flexibility to hug each foot in a customized fit.
Features of Men's Thorogood I-Met 2 Wellington Composite Toe Waterproof PR Boots
- Height: 10"
- Upper: Waterproof leather
- Outsole: Rubber
- Insole: Removable polyurethane
- Composite toe meets or exceeds ASTM F2413-11 M I/75/C/75 safety standards
- Composite safety toe caps provide the same protection as steel, but are non-metallic, corrosion resistant and transmit less cold
- Meets or exceeds ASTM class 75 Impact and Compression standards
- Under Class 75 test for impact the boot must withstand a 75 lb. impact with 0.50" clearance
- Under Class 75 test for compression the boot must withstand 2,500 lbs. of compression while maintaining at least 0.50" clearance
- Puncture resistance meets ASTM F2413-11 testing standards
- Puncture Resisting through the sole and heel area at a force load of less than 1212N (272 lbf) according to ASTM Standard Test Method for Foot Protection
- Protection against sharp object penetration is provided by puncture resistant material embedded in the midsole of the boot
- Class ASTM F2413-11 Mt/75 footwear retains a 1" clearance after a nominal impact of 75 foot pound (101.7J), i.e., a 50lb weight dropped reaching a 117.9 ± 2.4" per second velocity at impact 3.5" in from the toe of the boots
- The polymer compound used in the I-MET2 metatarsal guard absorbs and deflects impact to the instep of the foot, I-MET2 is an internal, invisible, metatarsal guard that’s completely integrated with the protective toe cap
- Met guards are traditionally used in areas where there is a higher risk of objects falling or rolling on the instep of workers feet
- Electrical hazard protection meets ASTM F2413-05 EH standards
- Shock-resisting soles and heels are capable of withstanding an application of 18,000 volts at 60 Hz for one minute with no current flow or leakage current in excess of 3.0 milliamperes under dry conditions
- Meets or exceeds the ASTM F2913-11 SATRA Test Method TM144 Standard for slip resistance
- Footwear with a static coefficient of friction of greater than 0.5 when tested according to ASTM F 489 using the James Static Coefficient of Friction machine
- Comfortable nylon lining
- X-Stream waterproof construction
- Removable polyurethane insole provides enhanced cushioning
- Engineered composite shank provides torsional support to the arch
- Rubber chevron outsole provides the best in abrasion-, oil-, heat-, chip- and slip-resistance
- Goodyear storm welt construction for superior durability
-
Size Chart
Men's Women's 3 5 3.5 5.5 4 6 4.5 6.5 5 7 5.5 7.5 6 8 6.5 8.5 7 9 7.5 9.5 8 10 8.5 10.5 9 11 9.5 11.5 10 12 10.5 11.5 12 13 14 15 Our Width Thorogood's Width Medium D Wide 2E Extra Wide 4E -
Strategic Accounts
Strategic Accounts
Our staff is dedicated to giving the best quotes for every specific departmental need. Product questions? Budgetary constraints? We can help. With over a decade of experience, our team is more than qualified to deliver excellent service.
Account managers can offer:
Competitive quotes
No sales tax
Free shipping
Single point of contact
Customer Reviews
This product has not yet been reviewed.
Write A ReviewMy Review for
Ask a question about
Questions & Answers
Have a question about this product? Our team of product experts is here to help. Have a question about an order instead? Contact us here.
Ask A Question